MotoCAN® – Motorcycle Accessories Manager
MotoCAN® – Motorcycle Accessories Manager
MotoCAN® – Motorcycle Accessories Manager
MotoCAN® – Motorcycle Accessories Manager
MotoCAN® – Motorcycle Accessories Manager
MotoCAN® – Motorcycle Accessories Manager
MotoCAN® – Motorcycle Accessories Manager

MotoCAN® – Motorcycle Accessories Manager

Regular price € 230.00
/

Bike

The MotoCAN® is designed to be directly connected to your motorcycle, interfacing with its CAN-bus system. This offers an incredibly adaptable and effortless plug-and-play solution for incorporating additional components to your bike including Moto Lights.

This eliminates the necessity of wire cutting, which could potentially invalidate your warranty. With the MotoCAN, you gain the ability to securely oversee your accessories, personalize your motorcycle, and enhance its safety for a smoother riding experience.

Lone Rider MotoCAN can power and control Moto Lights and other motorcycle accessories. Upgrade to control lights and other accessories automatically and directly from the bikes button clusters

MotoCAN is a Plug-in-Play solution to seamlessly control:

  • Moto Lights
  • LIN Smart Lights
  • Auxiliary Lights
  • Brake Lights
  • Air Horns
  • GPS Navigation
  • Dash Cams
  • Heated Gear
  • Air Compressor
  • USB Chargers
  • And other accessories

MotoCAN stands out from other CANBUS devices as has been programmed to get the full range of Moto Lights features and functions. These extended features and functions are compatible with MotoCAN and Moto Lights.

KEY FEATURES

  • One device controls all functions
  • Unified system management
  • Adds enhanced safety features
  • Maintains manufacturer warranty
  • Connects directly to the CAN-Bus
  • Discreet design – fits seamlessly under the seat
  • Simple software setup via USB
  • Four independently fused electronic channels
  • Waterproof and dust-resistant
  • Moto Lights Compatible
  • LIN compatible
  • 4x 10A outputs (25A, max 20s)
  • Self-resettable electronic fuses
  • 3-wire brightness control

COMPATIBILITY LIST

https://www.lonerider-motorcycle.com/pages/motocan-compatibility

WHATS IN THE BOX?

  • 1x Bike specific MotoCAN
  • 3x MT 3-Pin Blanking Plugs (to attach other accessories)
  • 1x Micro USB Dust Cover
  • 3x MT 3-Pin Male Connector Stub Set
  • 3x MT 3-Pin Rubber Plugs
  • 20x Zip Ties
  • 1x USB-USB micro Cable

The MotoCAN is required to use and customize all Moto Light features. It is recommended that the Moto Lights be exclusively used with MotoCAN. To know what MotoCAN you need for your specific bike, use the VIN decoder.

Please note: If you can't find your bike model under "Variant" above, you can order the Hex Innovate Gen II ezCAN to be used with your Moto Lights until we have a MotoCAN available for your bike. In this case, order the variant "Moto Lights set (2 pods) | No MotoCAN".

Compatible CANbus system:

  • Lone Rider MotoCAN
  • HEX ezCAN Gen2 (post V2408 software version)

NOT compatible with :

  • Any other CANbus system
  • DENALI CANsmart
  • DENALI DialDim
  • Clearwater CANopener

TECHNICAL FEATURES

MotoCAN Hardware specifications
Voltage supply 6V to 18V
System fuse rating 30A, automotive mini blade fuse
Maximum continuous current 30A (25A recommended)
Current consumption (operating) 25mA (typical)
Current consumption (sleep) 750µA (typical)
1mA (max)
Number of output circuits Four, each with switched 12V power, Ground and
PWM/data brightness control wire
Output circuit current 10A per circuit (continuous)
25A (max) for 25 seconds
Output circuit fusing Electronic fuses, configurable from 1A to 25A
Output circuit 3rd wire (PWM/data control) 40mA (short circuit current)
Measurement ranges:
Output current
CAN-bus voltage
Horn input
Switch input
0 to 72A
0 to 22V
0 to 22V
0 to 3.3V
Internal thermal protection 90ºC maximum internal temperature
Transient protection As per UN ECE Regulation 10 (Revision 5)
CAN connectivity 1x CAN 2.0B
USB connectivity USB V2.0 full speed, micro B-type connector
LIN connectivity Configurable LIN master (White power circuit)
Water and dust protection Sealed unit. Waterproof USB connector with dust cover
and sealed connectors

 

Product Certification

https://www.lonerider-motorcycle.com/pages/compliance/